Red 12V 20 GPM Fuel Transfer Pump with Nozzle Kit for Diesel Gasoline Kerosene Car Truck Tractor - High Quality

Item Specifications:Material: Steel Zinc CoatingColor: RedWatts: 265WRPM Speed: 2600RPMMax. Total Head(ft): 37FT=11.2MDimension of Inlet and Outlet: 1"Hose Length: 8FT=2.5MDuty Cycle: 30MinSeal Type: Oil SealFlow: 20GPMVoltage: 12V

Will Fit for The Following Models

For Transfer of Gasoline, Diesel Fuel, Kerosene, Mineral Spirits, Heptane, Hexane, E15, Biodiesel, and Similar Fuels or Oils.

Package Includes:1 x Wire with the Electrostatic Outlet Tube 12 Feets(3.66m)1 x 13A Manual Gun BSP1 x Cable Line 18 Feets1 x Independent Grounding Line 12 Feets(3.66m)1 x Steel Galvanized Hard Tube 1"NPT1 x 1" Pipe Bend(Inside and Outside Wire)1 x Pumps 20 Gallons, 12V Stickers1 x Pump with Ground Wire1 x Instruction Manual

(As Pics Shown)

Safety Information:

WARNING! Electrical wiring should be performed ONLY by a licensed electrician in compliance

with local, state, and national electrical code NEC/ANSI/ NFPA 70, NFPA 30, and NFPA 30A, as

appropriate to the intended use of the pump. Threaded rigid conduit, sealed fittings, and

conductor seal should be used where applicable. The pump must be properly grounded.

Improper installation or use of this pump can result in serious bodily injury, or death!

WARNING! To ensure safe and proper operation of your equipment, it is critical to read and

adhere to all of the following safety warnings and precautions. Improper installation or use of

this product can cause serious bodily injury or death!

NEVER smoke near the pump, or use the pump near open flames when pumping a flammable

liquid! Fire can result!

A filter should be used on the pump outlet to ensure no foreign material is transferred to the fuel tank.

Threaded pipe joints and connections must be sealed with the appropriate sealant or sealant

tape to minimize the possibility of leaks.

Storage tanks must be securely anchored to prevent shifting or tipping when full or empty.

To minimize static electricity build up, use only static wire conductive hose when pumping flammable fluids, and keep the fill nozzle in contact with the container being filled during the filling process.

The pump motor is equipped with thermal overload protection; if overheated, the motor will shut off to prevent damage to the windings.

WARNING! This product shall not be used to transfer fluids into any type of aircraft.

WARNING! This product is not suited for use with fluids intended for human consumption or fluids containing water.